Product Overview

When I first saw an EZRide+, my reaction was simple: "Wait — what is this, and why haven't I heard of it before?" After 40 years as a nurse practitioner, I thought I'd come across most of what's out there in mobility equipment. I hadn't seen this.

The EZRide+ is a lightweight power-assist attachment that clips onto a compatible manual wheelchair in seconds and turns it into a motorized ride — without the cost, bulk, or commitment of a full power chair. It connects and disconnects without tools, works while you're seated, and gives you real, everyday powered mobility for errands, outdoor time, and travel, all while you keep the manual wheelchair you already have.

I think of this as one of those rare products that can be a genuine game-changer, especially for someone who relies on a manual chair and doesn't need — or want the expense of — a full power wheelchair. Take a look through the photos above for a closer look, including a real customer's before-and-after and a full ride-along video.

See It In Action

Watch a real EZRide+ owner take it out of the car, attach it to his manual wheelchair, go for a ride, and pack it back up — start to finish.

Key Features

• Converts a Manual Wheelchair to Power: Adds motorized assistance to a compatible manual wheelchair without replacing the existing chair.
• Tool-Free Attachment: Connects and disconnects without tools, making it convenient to install or remove when needed.
• 35 lb Lightweight Design: Weighs approximately 35 pounds for easier handling, storage, and transportation.
• Up to 15-Mile Range: Provides up to 15 miles of travel per charge, depending on rider weight, terrain, speed, battery condition, and operating conditions.
• Three Speed Modes: Choose from Eco at 3 MPH, Mid at 6 MPH, or High at 12 MPH to match your environment and preferred riding speed.
• 300 lb Maximum Capacity: Supports up to 300 pounds including the wheelchair, rider, and applicable load.
• 360-Degree Turning: Designed for tight maneuvering and improved mobility in confined spaces.
• Forward and Reverse Controls: Hand controls provide forward and reverse operation and can be customized to accommodate individual preferences.
• All-Terrain Solid Tires: Solid-state tires are designed to handle grass, gravel, and uneven pavement without the risk of conventional tire flats.
• Built-In Safety and Convenience Features: Includes a horn, headlight, and kickstand for everyday use — the kickstand lets it stand on its own, no need to lay it down.
• Seated Connection and Disconnection: Designed to connect and disconnect while seated, helping simplify setup and removal.
• Digital Display with Real-Time Info: Shows current speed, selected speed mode, battery level, trip mileage, and total cumulative mileage at a glance.
• Included Multi-Tool for Easy Adjustments: A multi-tool is included so the brake handle and other fittings can be adjusted to fit an individual's grip strength and reach — helpful for anyone who doesn't have a strong or full grip.

See the Speed Range in Action

A quick real-world look at the three speed modes, with the on-screen display climbing from 3 MPH to 12 MPH.

Specifications

How It Attaches

The EZRide+ clips onto a compatible manual wheelchair's frame using a tool-free tow bar connector, and can be attached or removed while you're seated. See the attach/detach close-up and terrain photos above for a closer look at how it locks into place.

Designed for Everyday Independence

The EZRide+ provides powered assistance while allowing users to continue using their existing manual wheelchair. Its compact design, multiple speed settings, tool-free attachment, and solid tires make it suitable for everyday mobility across a variety of surfaces.

Important Compatibility Note

The EZRide+ is a power-assist attachment for compatible manual wheelchairs. Confirm that your wheelchair is compatible with the EZRide+ before purchasing, as attachment requirements may vary by wheelchair configuration.

Is EZRide+ Right for You?

These are two different physical tasks, so it's worth checking both separately — how much strength each takes is not the same.

1. Attaching it to your wheelchair (while seated): Can you hold and pull 18 pounds for 3 seconds, and push 18 pounds for 3 seconds? If so, connecting and locking the EZRide+ to your chair should be manageable on your own.

2. Loading it into a vehicle: This is a separate, heavier task — lifting the full 35 lb unit, not just locking a connector. See "Loading & Unloading" below.

Loading & Unloading From a Vehicle

We'd rather you know this upfront than be surprised by it: loading the EZRide+ into a vehicle, and unloading it, each require lifting the full 35 lb unit — about 30 pounds of that is the lift itself. If that's not something you can do on your own, having someone available to help with this step is worth planning for.

What's Included

Every EZRide+ ships with the accessory pack shown above: tow bar hardware, mounting brackets, and a hitch handle, ready to fit a compatible manual wheelchair.

Frequently Asked Questions

What's the EZRide+ weight limit?
I get this question a lot — it's designed to handle up to 300 pounds, including the weight of the chair and the EZRide+ itself.

What terrain can it handle?
It's built for asphalt, concrete, average-length grass, hard-packed dirt, and gravel. I'll be upfront: it's not designed for sand or the beach.

How far can it travel on a single charge?
Up to 15 miles, depending on your speed, weight, terrain, and incline.

Customer Experiences

Customers have highlighted the EZRide+'s ability to provide greater independence and reduce reliance on others for everyday mobility. Individual experiences and travel distances will vary based on rider, wheelchair, terrain, and operating conditions.